Search results

Hi im after the main power feed that goes from the driver s floor pan to the starter as fitted to the 2200sc, if anyone has a second hand one they want rid off, as Rosie is having starting trouble and the starter as been tested and all the wiring is new and that is the only thing thats old...

hi i ve decided to put up for sale my p reg white rover which is shown in members projects im moving soon and wont have space for her :( i will list as much info as possible, as i remember it its a white rover 2200sc showing just over 42000 miles but the engine now fitted has covered 80 k...

Hi ive just fitted tinted glass :D to my rover and have left over some stainless steel frames , i dumped all the rusty ones but i ve got left some good frames that just need painting up, they still have the little felt covered guide on the metal strip , the one that always rusts off, so if...

Hi i have a set of good clean door handles for sale, i would say very smart and would be nice on a daily driver or a tidy p6. £10 the set plus pp if anyone wants a nice set, with small bolts to hold, pic of the said items. regards marcus

Hi i have for sale a seat of bronze cloth seats out of a 56k car they are in good condition and drivers is still very firm, just small amount of fading on them. all the others trim is with it door cards , side bc post trim and the back pillars plus glove box if interested pm me. i would prefer...

4 tr control boxHi all im fitting a new wiring loom to rosie (2000sc 1971), but im fitting the newer type loom were the fuse box sits inside the car on passenger side. all is going well but ive hit a problem on rosie there is a 4 TR control box with 4 wires coming out . they are as follows left...

Hi im looking for a good complete rear wiring loom for rosie, 2000sc . if anyone has one marcus

Hi all im after replacing my loom and need to fit new wire holders the black plastic straps , i remember reading on here that you can get similar ones but i cant find the thread. so anybody replaced theres ,if you can point me in right direction please thanks marcus

hi can anyone on here confirm that the crankshaft on the auto is different to the crankshaft on the manual, ive got a 2200sc auto engine which im trying to fit into a manual 2200. but it looks as if the crankshaft its totally different and i wont be able to fit this engine any ideas anyone marcus

Hi as some of you know i got a v8 l reg tub all in excellent nick small welding needed but all done, i was going to use as a project but i have the rosie and white rover needing work, so as i cant bring myself to part with rosie im moving v8 on, im in no rush to move it but if someone out there...

hi i dont know if you remember the car below which we purchased 2 and a bit years ago ,well its now back with new paint, when we got it there was only 42000 miles from new and is totally rot free tub and panels were all excellent but the paint had faded being white so some pics below of the car...

hi i found these bits in v8 and dont want them if you want them or any bits of them just say, or i will bin as i need the space. there dirty but in good nick, a lso have the glove boxs but one as a hole at bottom but cant be seen when fitted, if you want just say marcus :D

Hi all im starting a new project , and i need some good secondhand panels in almond im looking for them over the next year so no rush, but on your travels if you see any of the following please let me know condition i would like is good to tidy but i can do some repairs as its so i can get the...

hi im trying to find if these to rovers are still around for a friend, series 1 rover reg no AWY 534 G sd1 rover YVY 751R any info would be good marcus :D

hi all i was after a new winter/many winters . its a v8 with a shell thats been all cleaned up and welded up.it was heading for the scrap heap and i wanted something to fill my winter months its not a D reg thats just a boot that came with it i ve set myself a goal to put the car back on the...

Hi anyone know how to remove the rear quarter lights from the series two door frames, i ve tried and ended up destroying them as im wanting to change mine to tinted glass, and my frames are in good condition and i want to keep them and just change the glass. so any help please marcus

hi all i m changing my water pump and removed the old one last night and ive noticed that there is a difference , ie long nose /short nose, im is the long nose but , if you look at pics the one ive removed has a blanking over the highest fixing bolt hole, and a location pin on the block, were...

hi not sure if this is right place, im tring to fit an oil pressure gauge to rosie 2000 sc manual, but were do i fix in the pipe on the engine block, is it put were the oil switch goes, if so were do i get a male connector from , as thats a female and so is the end off my pipe, sorry its not...

hi im looking for a good pair of rear over riders for my 2000 sc , some that are just tidy will do, as i want them in aid for my reversing upto wall in garage marcus ps are the front and rear over riders the same please :D

i ve decided to make space, and thats left me with a lot of parts some good some bad, so i will be listing on here any items that i m giving away, some stuff i will sell but if it dont sell i willl list for free and if not wanted i will scrap, as i would sooner let you guys have what you want...

Hi im trying to get the engine to run better , but when i remove the plugs there there wet and black, ive been told the mixture is to strong, ive read the books and it shows a mixture screw next to the throatle screw i cant see this at all anybody any ideas on were or how a turn the mixture down...

Hi all rosie the rover ( as we all call here in the family) after a 3 month welding and learning to weld ive finished , result new inner and outer cills floor area repaired, welding to rear/front wheel arches both sides. then an interior wiring fire so all the dash out and wire repaired (what a...

Hi dont know if thisis the right place but im selling a exhaust manifold for a 2.2 tc , but i dont want to under sell it or rip the someone off whats a good price for a exhaust manifold, as i need to raise money for my rover s work but , i dont want to rip off a fellow rover owner any help...

Hi all after rewiring all the burt out wires ive got everything working BUT my indicators dont , they work on hazzard switch but not from the stalk on column, is there something ive missed thats simple i hope so its turning out tobe a longer job than all the welding ive just done any ideas folks...

hi