corazon
Well-Known Member
Lathe is nearly ready, basically all primed ready for topcoat, which is something rather special..here's a clue- Hemi
Ok so I'm currently stripping the car in readiness for blasting. I found a local place to dot he whole shell for £600 so I'm extremely happy with that. Once it's back I'll be putting it on a rotator, doing a few repairs and modifications and then spraying in epoxy.
The ZF boxes have gone away to Andy to build me up a strong hybrid 22/24 box, and my 4.6 block is about to go to John Eales for flanged liners. Yes it's certainly a money splurge time but I worked very hard over the summer and recently received all my overtime pay in one lump sum so everything is getting done at once!
Jim
Ok so I'm currently stripping the car in readiness for blasting. I found a local place to dot he whole shell for £600 so I'm extremely happy with that. Once it's back I'll be putting it on a rotator, doing a few repairs and modifications and then spraying in epoxy.
The ZF boxes have gone away to Andy to build me up a strong hybrid 22/24 box, and my 4.6 block is about to go to John Eales for flanged liners. Yes it's certainly a money splurge time but I worked very hard over the summer and recently received all my overtime pay in one lump sum so everything is getting done at once!
Jim