As ever slow progress has been made, will need to update the photos as I see photobucket links have finally started to fail.
I have been thinking of getting work done and how to go about a few challenges.
With the original panels I have been looking at dipping or blasting to remove the rust.
There was an interesting youtube video of DIY electrolysis (
rust removal). I used to think it was not practical due to the size of the wings but realised that i could just knock up a wooden frame and thick polythene sheeting for panels. I already have a battery charger with a decent output so could be worth a try. Has anyone tried this? what were the results?
Also now I have a working compressor the idea of sand blasting and trying a bit of spray painting are options.
When the weather improves and the nights get longer I think I will pull the engine and box out and make a start on the engine bay. Will also get the box checked out and get the engine stripped for inspection. If the rear seal is rope then I will get it machined for a neoprene type.
Would be good to get it on the road this year but at current rate of work that isnt likely. Being off the road since 1982 another couple of years wont hurt.
I am still considering a colour change to Atlantis blue so this is giving me extra time to change my mind several times.