RichL
New Member
Hello and hope you all had a good Christmas,
My P6 had the D posts cut off right across the flat where the wing bolts to, not by myself I may add but by a guy I had doing some work for me. This lopped the inner siffner panel in half, the rest of the panel had its spot welds drilled out with an 8mm drill bit and was wrenched / bent from the outer panel.
I am looking for a pair of d posts cut from a scrap base unit if anybody can help. Not looking for anything decent, in fact ropey would suit as I have new reproduction panels to fit just as long as I have the full inner stiffner with the door lock captive nut cages etc. that forms double skin of the d panel.
Anything based preferably within an hour from Hull and cheap would be great.
Many Thanks
Rich
My P6 had the D posts cut off right across the flat where the wing bolts to, not by myself I may add but by a guy I had doing some work for me. This lopped the inner siffner panel in half, the rest of the panel had its spot welds drilled out with an 8mm drill bit and was wrenched / bent from the outer panel.
I am looking for a pair of d posts cut from a scrap base unit if anybody can help. Not looking for anything decent, in fact ropey would suit as I have new reproduction panels to fit just as long as I have the full inner stiffner with the door lock captive nut cages etc. that forms double skin of the d panel.
Anything based preferably within an hour from Hull and cheap would be great.
Many Thanks
Rich