D Post stiffner panels

RichL

New Member
Hello and hope you all had a good Christmas,

My P6 had the D posts cut off right across the flat where the wing bolts to, not by myself I may add but by a guy I had doing some work for me. This lopped the inner siffner panel in half, the rest of the panel had its spot welds drilled out with an 8mm drill bit and was wrenched / bent from the outer panel.
I am looking for a pair of d posts cut from a scrap base unit if anybody can help. Not looking for anything decent, in fact ropey would suit as I have new reproduction panels to fit just as long as I have the full inner stiffner with the door lock captive nut cages etc. that forms double skin of the d panel.
Anything based preferably within an hour from Hull and cheap would be great.

Many Thanks
Rich
 
I've got a base unit that I'll be stripping in the next few months. Located in Bedfordshire. You're welcome to come down and remove bits if you like..
 
Hello Mike, Chris,

Thanks for replying to me, appreciate your kind offers. I am not in any hurry so I do not mind waiting.
Mike, where abouts are you in the country please as I would like to sort out getting these when you are ready if okay?
Chris, thanks for your offer. Bedfordshire is a litttle further than I wanted, but if all else fails I may come to you next time I am down south on any other business. That is of course if you still have the car when I can organise a time.
 
Hello and hope you all had a good Christmas,

My P6 had the D posts cut off right across the flat where the wing bolts to, not by myself I may add but by a guy I had doing some work for me. This lopped the inner siffner panel in half, the rest of the panel had its spot welds drilled out with an 8mm drill bit and was wrenched / bent from the outer panel.
I am looking for a pair of d posts cut from a scrap base unit if anybody can help. Not looking for anything decent, in fact ropey would suit as I have new reproduction panels to fit just as long as I have the full inner stiffner with the door lock captive nut cages etc. that forms double skin of the d panel.
Anything based preferably within an hour from Hull and cheap would be great.

Many Thanks
Rich
Hello Mike, Chris,

Thanks for replying to me, appreciate your kind offers. I am not in any hurry so I do not mind waiting.
Mike, where abouts are you in the country please as I would like to sort out getting these when you are ready if okay?
Chris, thanks for your offer. Bedfordshire is a litttle further than I wanted, but if all else fails I may come to you next time I am down south on any other business. That is of course if you still have the car when I can organise a time.
I’m breaking 3500s at the moment
 
Hello Ricky43,

Thanks for your reply. London is a little far, but will keep in mind if I can't find anything closer.
 
Back
Top