SOLD

D

Dooleyz

New Member
Hey guys recently I have bought a set of revolution rfx in 7j x 15" these were what Moderlines originated from. Since then they have been stripped and professionally polished awaiting tyres and fitting,
PCD is 5 x 127
Centre bore is 57.1.


Heres the before picture:

carrera3020.jpg


After:

IMG_0530.jpg


IMG_0531.jpg


One of the wheels has slight pitting on the face as it was left to be abused for a very long time this didnt bother me as I was going to either run them anyways or have the faces sprayed.

I'm looking for £400 looking for offers in that region, no timewasters please. cheers
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Crucial question is what offset are they? P6's are very sensitive to the wrong offset!

Chris
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Hi mate ill have a look tomorrow and check to see if its stamped on the backs.
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

By the looks of them they are way too deep for a p6!!
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Theres no et stamped on the inside mate but ill have a look around and see what other revolution rfx in 15x7j are and get back to you
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Willing to take offers guys need them gone asap £250 collected?
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Where are you and what is the distance from the inside of the hub face to the inner and outer faces of the rim?

Edit

Is the hub part solid/flat or does it have recesses between the stud holes?
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Hey mate ill measure them tomorrow and get back to you. The faces are solid as i was going to get them welded up and redrilled but having to pay for a holiday now so lookin to try and get rid as quick as i can to pay it off. I live just outside Derby place called Belper. Joe
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Dooleyz said:
Hey mate ill measure them tomorrow and get back to you. The faces are solid as i was going to get them welded up and redrilled but having to pay for a holiday now so lookin to try and get rid as quick as i can to pay it off. I live just outside Derby place called Belper. Joe
Click to expand...

Derby's not too far from me and the solid centre sounds good :wink:
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Hey mate from the outer lip to the inner face is 60mm and from the rear edge to the inner face is 130mm. Joe
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Dooleyz said:
Hey mate from the outer lip to the inner face is 60mm and from the rear edge to the inner face is 130mm. Joe
Click to expand...

ET is 35 then (if my maths are correct and I understand your measurements)
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Dooleyz said:
Hey mate from the outer lip to the inner face is 60mm and from the rear edge to the inner face is 130mm. Joe
Click to expand...

Thanks for that. I'll take my tape measure out first thing in the morning to see if they'll work :wink:
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

i know mate ive been through your build thread and there some awesome work mate!
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

I don't actually intend them going on a p6 :wink: but at least they should go on and be of use if they won't fit rather than be another garage wall ornament :D

E-mail on it's way to you Joe :wink:
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

quattro said:
Dooleyz said:
Hey mate from the outer lip to the inner face is 60mm and from the rear edge to the inner face is 130mm. Joe
Click to expand...

ET is 35 then (if my maths are correct and I understand your measurements)
Click to expand...

Sounds about right matey
 
Re: Revolution RFX / Schmidt Modernline 5x127 PCD

Cool dude yeah id rather them go to someone whos going to get some use out of them like you said would be a shame to never use them.
 
You must log in or register to reply here.
Back
Top