NickDunning said:I don't think it's that clear cut - Ian Wilson is the expert on this.
The switches can be found in the USA, but they are still not cheap and bringing them over, once you have located some stock, is still costly.
Cheers
Nick
amcdonald said:Thanks gents!
That's one thing off the list. Now I have to fabricate the surround for the main control somehow.
hi kiwirover,
those are the wrong switches for the bank of four, there are at leats four different ones, that i know of. ours only have 9 pins on the back, the one listed has 10. then the other thing you need to take into consideration is the pattern and the spacing of the pins so that they fit into our loom.