Hi, indecater troubles not working at all but were

L

leonard

New Member
Sorry if this is not the right thing to do here .
I own a 1971 rover p6 2000tc , I've had it just before covid started.
Been working on it over the years I've had it .
Have one thing to ask , all my indecaters were working all OK but now can't see why not now plus hazerd done work now as well
Can anyone help with this problem please
 
I've moved your thread to the P6 electrics section, best to change the title as it may get you more answers.
 
Power to the flasher unit?
Bulbs in indicator?
Ignition switched on?

You should do some basic fault-finding before asking vague questions.
 
Hi not being funny that, my I've put on here that I need help lol I've done the things I can look at .
I'm 64 and had classic cars for years .
So now we got that out of the way , my lights are still not working lol.
 
leonard said:
Thanks for your reply very nice of you
Happy new year to you .
Click to expand...

As Harvey said, that’s where I would start. I went to replace my switch panel recently as the Perspex was all cracked, thought I’d get away with using the switches on the replacement panel but as soon as I did that I lost indicators and hazards and that was due to dirty contacts on the hazard switch on the replacement panel.

I ended up just putting my old one back in but I’m sure a bit of time with some contact cleaner would have got it all working again.
 
harveyp6 said:
Operate the hazard switch multiple times and then try the indicators again. The hazard switches corrode through lack of use.
Click to expand...
Nothing gets past Harveyp6. on his advise I did this to mine and the system went back to factory setting, plus a bit of electrician in a can from CRC. to be sure
 
StefanVXR8 said:
As Harvey said, that’s where I would start. I went to replace my switch panel recently as the Perspex was all cracked, thought I’d get away with using the switches on the replacement panel but as soon as I did that I lost indicators and hazards and that was due to dirty contacts on the hazard switch on the replacement panel.

I ended up just putting my old one back in but I’m sure a bit of time with some contact cleaner would have got it all working again.
Click to expand...
Thankyou for what you have said very nice of you many thanks
 
You must log in or register to reply here.
Back
Top