DamianZ28
Active Member
Hi all, car had new coil I fitted a while ago but wasn't running great so I refitted the old one to see if any different but no change, left it on as it turned out to be carb issues. So thought I'd refit the new coil for peace of mind as the old one is 'very old' indeed, as precaution I took photos of the wiring connections , swapped it all over, all back as it was but now will not start, no spark at all, cannot figure out for the life of me why it suddenly has no spark, have not touched any other wiring at all, car ran literally before this as I moved it out of the garage to work in the sun! Checked & rechecked all the connections, fuse is ok, it has new plug leads too!. I don't have a metre so cannot check any power so to speak, refitted the old coil but still no go, removed one plug, pushed the lead back on & held it against a bare metal patch in the engine bay to earth it but no spark whilst cranking the engine over... any ideas most welcome ! so bloody annoying as I want to cruze in the sun to get to the 500 mile running in!. cheers Damian.