Hello Harvey!harveyp6 said:PCD is 5x5" IIRC, but can't remember the offset offhand. If you just want 2 standard P6B wheels I suggest putting a post in the "Wanted" section, there must be lots of people with standard rims looking for a home judging by the number of cars on here with alloys, mine included..........
SD1 wheels will fit but are of differing widths, and the valve is in a different place relative to the studs.
Preben said:Hello Harvey!
I live in Sweden so buy some wheels from England will be expensive, and these cars are pretty rare over here. I bought it as a little project, but the former owner had fitted it with some ugly slotmags 20 years ago, 4 steel wheels were part of the deal, but when i painted them, i saw that one was wider than the others.
I have no pics, but they all look the same (except for the widht) there are no slots or anything in them, the three i have are stamped with some kind of roverstamp in the middle and are about 125mm (5") wide between the "shoulders", the wider one has no stamp at all. I thought that the 2000 maybe had 4 bolt wheels and the 3500 had 5 bolts.quattro said:You may have 3 wheels for a 2000/2200 and 1 from a V8.
Got any pics?
I thought that the 2000 maybe had 4 bolt wheels and the 3500 had 5 bolts
Preben said:I just found out that i have 3 fourcylinder rims and only one V8.
I think i have localised some wheels, but i dont know for sure before april, but maybe i can find some before that. Thanks though.mrtask said:I have a set of V8 steel wheels off a '72 3500 automatic which I could sell you. I am in Berlin, Germany. I would like €100,- for the set of four. If you are interested I will find out how much packing and postage would cost. They currently have four mismatched old 185/HR14 tyres on, but I imagine you would want them removed from the rims. I also have the hubcaps for them, for which I would like a further €50,-. I do not have wheel nuts for sale.
Thank you Tor!Tor said:Hello Preben (tjena!)
There's a gentleman in Sweden by the name of Anders Löfström who has a big selection of parts, I'll PM his number from another forum posting. I also know a Swede located in Norway with about six cars' worth of parts.
Regards,
Tor
On the east coast, between Kalmar and Oskarshamn, it´s quite a trip to Norway.Blueman said:Hi
I have some wheels from a 3500 here in Oslo. Where in Sweden do you live?