Black & White?

No way! I have to think of my reputation. (As a sad old anorak!) But I will let you know if you find it. Get Nick Dunning on the case, he likes a challenge.
 
That's the one, it's fitted with a boot mounted spare kit but the lift handle is missing. Treat yourself to a nice cool black pint with a white head!
 
i used to have a black S1 V8 (588KX) with buckskin interior,i paid £50 for it as it was minus reverse gear (amazing what happens when you fill the box up with oil :)), i had 18 months of trouble free motoring until the brakes failed :O :p,..sadly she is no longer around as some toerag nicked it :angry: :angry:,...we found what was left of her in the local scapyard
 
I worked with someone who bought a V8 with no forward drive, so he did what any sensible (?) person would do. He reversed it all the way home. After all it was only about 5 miles!
 
Quality!
Dave, I bought a set of wings for 25 notes, only the rears are useable, very rust free in fact, but they all came with good light units, and foam gaskets, now there`s a coup!
So I probably will do a panel at a time. As I`m a bit anal with cars and never tend to sell them unless they`re too far gone (they usually get nicked!) :( I`ll probably hang onto it at least for a good while, so was planning on leaving the dash and carpets where they are and not paint the floor or bulkhead??? Just the bits you can see without dismantling anything??? What you peeps reckon? I can`t abide not being able to use it for another 6 months while I completely strip it, and I`m not looking to completely restore the car, just do what needs doing and make it black!
??? Drew
 
mrtask said:
Hmmm, not got the knack of this yet obviously: How do I get the image into the body of my post? (Chorus of "Doh!")
Click to expand...
hi mr task
once youve got the images http copied from,photobucket for example, for pasting, select image on the toolbar, not the http:// bit!! load it and then title it. have a play with it on a previous posting page.
using the http:// link, you can load from you tube,movie clips etc
have fun
dave

DREW HI,
My thoughts on light gaskets is dont bother fitting them as they are a severe moisture trap ??? I bought a new set for mine,and when I took a front light out to replace inner and outer foams,the old ones were saturated,so ive left them all out. theres no rattles and any water just drains straight through
:p
 
You must log in or register to reply here.
Back
Top