Search results

Is anyone running a GM t5 5speed gearbox in their 3500S P6……I think i can get a bell housing but what other issues am i looking at……i'm sick of the SD1 5 speed i put in my 3500S Nada……the shift is horrid and i have the dreaded whine also Thanks Bill Robertson

Before we start i'm in Ontario Canada so they will have to be shipped although there is not much of any weight but it would be bulky...Hopefully someone over here will take the whole bunch if not someone over ome would take it all Head gasket set for Rover 75 Manifold gaskets Clutch pedal oil...

are the mirror heads the same......my stems are good....can i maybe find new mirrors just Thanks Bill

I need a pair of good or new if possible Wingard mirrors for my 3500S.....any ideas..i seen a pair on Ebay and my puter froze so i lost those.....thats the first set i have seen in ages Thanks Bill

i'm looking for NOS 3500S badges for the front grille and rear trunk(boot) for a NADA 3500S......any leads Thanks Bill

My 2000 TC has developped a miss at low revs usually.....when the miss is occurring the tach jumps all over........I've so far changed the coil...no change........then changed the condensor....no change........i'll try the points, rotor and cap next.....(I have a wonky back so can only do a...

I'm looking for a MOMO boss kit( steering wheel adapter) for my 3500S or similar that will adapt a MOMO steering wheel to my P6 ...........i also need a good leather wrapped center console for my 3500S but barring that i'll use a 2000TC plastic console.........i'm referring to the tunnel...

I'm trying to describe the small windows on my P3 and many old cars that are up at the top of the door over the windup windows that to me keep the rain out but allow you to open the window a bit for air....i can't for the life of me rmember what they are called other than rain guards Can...

Does anyone have a clue as to the numbers of P3 models that were made in LHD.....I see there were 9,111 P3's made in 48-49 of which 2989 were made in 49...That leaves 6122 made in 48 in both 60 and 75 form....i'm trying to derive how many of the 6122 were made in LHD. I'm ultimately trying to...

I'm back and more determined...i've put a new master cylinder in the car but looking at the old one trying to determine why it leaks even with the new seals in it.........the exploded view in the manual shows the plastic bearings and seals going one way yet the main piston image is exact...

Hi all My brake master cylinder on my P6 3500S NADA was leaking so i went to rebuild it and the plastic retainer (#33 in the layout picture in the manual)on the small spring end is broken and the 2 plastic bearings (#37 and 39 in the picture) are scored and cut so i can see where...

I don't know if that is the proper word for it but does anyone have a new or good round plastic finishing piece for the 3500S NADA power window switch says WINDOW MASTER and ON on it........The round plastic finishers that tell you what the switch does Mine is ruined Thanks Bill Robertson

I don't know if that is the proper word for it but does anyone have a new or good round plastic finishing piece for the 3500S NADA power window switch says WINDOW MASTER and ON on it Mine is ruinedThanks Bill Robertson

1948 Rover 75 P3 for sale.....can't afford storage anymore and no time to devote to the car....Car is in Ontario, Canada..body good..... running but needs work....interior needs TLC ..has custom seat covers and carpet but needs new door cards ect....wood is good , sunroof, 6 cylinder lights and...

Does anyone have a new 3500s grill badge.......the 1' X 6' badge that just says 3500S that mounts to the front grill Thanks

Does anyone know how many 3500S NADA P6 were imported into the US and Canada in 1971, and conversly when did they start importing them to the US and Canada.....my father had a 1970....i'm thinking that was the first yearand 1971 was the last Thanks

I played with this thing for a week now and it finally started ........It originally did not start and after changing the cap, rotor, points, and condensor....still nothing.....i mistakenly believed i had mixed up the plug leads on the cap........i finally found a plug lead setup in an...

Since the shop manuals seem useless in this instance i've posted the only pic from an intereurope Repair Manual of the correct plug lead arrangement and mine at moment but it still hasn't started LOL...i've added colour just to make it clearer......the pics are at the Yahoo Rovernet site in the...

When rechecking everything, i discovered i switched the plug wires when putting on a new cap......doing it from the back i had all plug leads 1 back....1 where 2 would be , 3 where 1 would be etc........ I fixed that now but still have nothing.....i put back the old cap points and condensor...

I went to start it up (69 2000TC)first time this year and it ....wouldn't hardly turn over.......new plugs and points and condensor ....its really hard to turn over.....even with 2 batteries ....i checked the compression....all even and good......cleaned the contacts on the solenoid and...

Just starting her up after winter storage and the carbs seem out of whack.........i'll try the colortune....i've yet to make something for the air cleaner nut so i can use the unisyn or rover carb balancer.....I think looking at the carb the rear adjusting screw is alot higher but both locking...

Hi anyone know off hand what the stock 2000TC block has to be bored out to to fit the 2200 pistons.........must be more than .060......a machine shop called me doing a Rover and asked if it was like .200...and if it was safe to do so .......i know you can but don't know the...

Hi my 1970 3500S NADA P6 needs the 2 rubber grometts or seals for the servo non return valves that plug into the servo....they are not shown clearly in the book but it looks like ...part #606031..or LO3865-733...... lists 1 in book but both look sameThanks Bill Robertson