Search results

  1. I

    Airconditioned V8.

    hi rovering member, i only have one and that is for mine in case it goes. you can use a standard V8 water pump and cut off a bit of the front centre shaft before you use your old special piece ( can't think what it is called ) which is a push fit on to the centre...
  2. I

    Very early 2000 TC / ebay

    hi, servo is a girling unit. ian
  3. I

    16k from new - I wonder who has the lowest?

    hi, three cars came out of a museum a couple of years ago, one with delivery mileage. ( i think it now has a couple of thousand on it ) i also know of a series 1 that is under re-commisioning with 5000 miles on it. ian
  4. I

    Airconditioned V8.

    hi, answer to your first question about the viscous unit. the viscous was fitted to all NADA cars that went to the states, either air-con or non air-con. if it is the same it will run a 13 blade plastic fan and a shroud that is fastened to the radiator. it is a lovely system and when stood...
  5. I

    Quite nice - Not mine so not "selling"

    hi all, yes it is opaline, ( which is a sdi colour ) it was restored by J.P. RESTORATIONS for ray weekley, who sold it when he sold his business to me. ian
  6. I

    WANTED: LT77 5 Speed Gearbox - In good working order.

    hi spinningfish, mike breading has a recon 5 speed. give him a ring on the club line or e-mail him through the forum. ian
  7. I

    NADA 3500 S bonnet scoops

    hi chris, you are right, the scoops are aluminium, but the piece inside to deflect the rain are plastic. ian
  8. I

    P6 3500EI and 3500S Lucas Injection - the P6's that didn't make it!

    hi chris, as far as i know he still has it. it has been a few years since i saw it, but was a nice car and yes the triplex glass roof is the only one i have ever seen. ian
  9. I

    Valance stud plates - and outer brackets!

    hi drew, bumper iron rubbers, 4 on a V8 ( 2 front, 2 rear ) 6 on a 4 cyl ( 4 front, 2 rear ) and yes i keep them in stock. the bumper iron rubbers i have had remade to original spec with the rounded corners. ian
  10. I

    Happy Birthday Ian!

    hi all, mant thanks. i am glad you appreciate the effort i am putting in to getting new parts re-manufactured. the bonnet badge is next on the list, hopefully the beginning of june and the price will be £65.00. ian
  11. I

    Is this really Monza Red - Colour??

    hi camel, never be ashamed. we all started somewhere with something, this is what this forum is all about, HELPING OTHERS, i personally have been into / had ( breaking, restoring, servicing and latterley selling new and s/h spares for them ) the p6 for 13 years and have like many...
  12. I

    Is this really Monza Red - Colour??

    hi, monza red it is. paprika was onlyavailable for 18 months 75-76, N & P reg. ian
  13. I

    p6 3500 rear brake cup assembly (part no. 601916) - new ones needed: who can supply them?

    hi, i have four or five new old stock ones left. 01777 816600 ian
  14. I

    Door window rubbers

    hi, tell me about it. i have had quite a few items reproduced last year. mould costs have been from £100.00 to £2300.00 for the bonnet badge which is in the process of being done at the moment and should be ready in about 6 weeks. i had a look at the door-glass seals and each mould was...
  15. I

    HELP NEEDED

    hi, as i am in business i use couriers and ship heavy items. a pallet will be needed as the engine needs to be lifted on and off lorries etc, so will need a forklift truck to do so. ian
  16. I

    Grease Nipples - Where are they all???

    hi, there is only one grease nipple on a p6, which is on the front of the sliding propshaft. original u/j's were all sealed items. QH and HARD SPICER are still sealed. some new ones do have a grease nipple in them, but be careful when fitting them as there is a right and wrong way, the 'U'...
  17. I

    2000TC air filters  ARRGH - Help!!

    hi zebedee, i have not had any correspondence from you ( probably lost in cyber space ) air filters for yours are £3.50 each. thanks for the comments on the website, i will have to get round to getting more pictures taken of the stuff i have and get my website designer to list...
  18. I

    Seized gear select cable - 3500 auto seized cable

    hi, what is the exchange rate, i want £27.00 for mine plus obviously the postage. ian
  19. I

    immaculate Colorado '70 NADA P6 - Sky blue metallic beauty

    hi arthuy, all the NADA / Federal cars were designed with the petrol reserve system at the back exactly like the picture shown. firstly the compressor and brackets are in the way for using the mechanical fuel pump so it was capped off and redesigned. the fuel line from the tank...
  20. I

    immaculate Colorado '70 NADA P6 - Sky blue metallic beauty

    hi chris, i have just last week listed the standard features of the NADA / Federal and the optional extra was AIR-CON, but most did have it. the front window switches are mounted in a panel the same as the air-con fascia, but without the holes and markings for the knobs that control...
  21. I

    Reserve fuel lever

    hi, organ doctor, you have it the wrong way round, inside the fuel tank, the sender unit has the main feed with a pipe roughly 4" up, the reserve has the mesh filter at the bottom, to stop all the crud etc from being drawn down the pipe. the reserve cable on lawrence's car runs down to the...
  22. I

    Amber light above clock in series 2 3.5 - what is it telling me?

    hi jimmy, welcome. as you might have already noticed the light does not come on when you start the car from cold, it works the opposite way, when the car is upto temperature the light comes on letting you know it is time to push the choke in. ian
  23. I

    Hello

    hi lawrence, NADA stands for NORTH AMERICAN DOLLAR AREA, don't ask me why ! or Federal as they were also known. 2017 of them went to the states, ( rest went in to europe, don't know how many ) fitted as standard were electric windows, wrap round bumpers, square no plate plinths...
  24. I

    Hello

    hi dave, the white box is the high pressure cut-out for the air-con, they never had a low pressure cut-out switch in it which was bad for seizing the compressor as if the gas gets too low the pump still caries on working but as there is no or hardly any gas going round the system (...
  25. I

    Hello

    hi, mike jones ( our past chairman ) has one, i believe eric boardman has it now. that white one of mine had one hell of an air-con system in it, the guy i bought it from had not used the air-con for about eight years and when i tried it it was still working and the best i have had ( cold...
Back
Top