Should I send these back???

[richarduk]

I got these leads from JRW and too me they look like Ford OHV leads, they certainly look nothing like the ones on my 2000 engine. The main issue is the kind lead, without the 90 degree bend at the ends it sticks up in a big loop and when the bonnet is closed it is pushed up against it, not good in my book. Because of this I did not fit them

Get worse if you look on eBay! These ones look like 5 cap to plug leads!!

The closest I could see were these new old stock ones, can't tell if the ends that go on the plugs are correct, but at least the king lead is right, not sure about using 'old' but unused leads.

P.s. All the other bits I ordered at the time were 100% ok.

 

[hermione149]

Hi Richard,

Take'em back mate,there're clearly not suitable,for a start,..the leads are too long and they don't have the 90 degree bend on the dizzy end, the plug caps are just wrong :shock: ,..ideally the king lead should have a 90 degree on both ends,

I think you're best bet is the NOS ones,they look as though they have the right bits,...if i were to be replacing Hermione's,these are the ones i'd go for.