Series 1 static seat belt hooks

S

SirD66

New Member
I have recentley purchased a 66 2000 which has static seat belts. The interior is in good condition, but the hooks to hang/store the front seat belts on the door pillar are missing. Autobooks 2000 63-69 page 117, fig 12.7 illustrates. A friend who also owns an early p6 also tell me these are often missing because they are made of plastic and break with age. Anybody got a pair? thanks
 
I've got a '69 P6B with Kangol static belts, my brackets are metal.

Just so it helps.... I trawl e-bay a fair bit but have never seen any. Your best bet is the local breakers, occasionally P6's come in but JRW and Weekly's will tell you now, Series 1 interior bits are getting rare.

I know about the plastic parts, my interior light (central) lens simply disintegrated and that's proving a problem to source a replacement.

Good luck.

By the way, those buckles are a bugger if you get them jammed between the sill and door, have closed the door before only to jam it shut thanks to the seat belt buckle.
 
hi,
if you mean the round lens in the roof, pop down to your land rover dealer they are still available new.

ian
 
Range Rover Classic uses the same lense - the lamp holder is the same too, but painted instead of chromed.

Chris
 
I had the same problem with a different classic, so did most owners, coating the exterior only of the lens with clear nail varnish, the non-smelly type prevented any further damage to already brittle lenses. Also helps to remove the bulb when doing jobs on your car with the door(s) open! It`s the heat that does it you know???!
Cheers :)
 
You must log in or register to reply here.
Back
Top