1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Original (looking) HT Leads P6 2000 SC

Discussion in 'Electrics' started by PNP, Sep 12, 2017.

  1. PNP

    PNP Member

    Wondering if you can purchase good quality HT Leads (for a S1 2000) with original looking rubber skirts that keep the dirt out of the head. I'm getting a bit carried away but want to keep everything original.

    Cheers
     
  2. Vern Klukas

    Vern Klukas Member

    The originals didn't have rubber skirts, they had plastic towers (with holes so dirt still got in) that had the plug connector and the HT leads screwed into the top of the tower. If you can find a set of those, it is trivial to make up HT leads to suit.

    Yours
    Vern
     
  3. Demetris

    Demetris Well-Known Member

    Original 2200 HT leads have the rubber skirts that you mention, so that they effectively seal the spark plugs.
    NOS ones appear from time to time.
     
  4. roverp480

    roverp480 Member

    The original plug cap if its 214262, is still available from the Land Rover Series One Club, who have had some reproduced , not sure if they only supply members though. John Wearing and John Craddock is listing them as well
     
  5. PNP

    PNP Member

    Thanks Team, I will chase up the Series 1 LR lead. looking at images on google the plug holes look very similar.
     
  6. Vern Klukas

    Vern Klukas Member

    My bit of P6 learning for the day. And I should of recalled that LR used the same towers, I used to know that ;-)

    Yours
    Vern
     

Share This Page