cdnp6
Member
My ignition barrel had some play in it recently which caused it rotate with the key when starting.
This rotating was causing my heater motor to run intermittently.
After tightening the barrel, everything seemed OK. Wiper motor and heater motor both working.
My heater motor has now given up the ghost, although my wipers work fine.
The rubber cover on the spade connector that connects to the ignition switch was a little melted so I spliced in a new connector.
Still, wipers work OK, but no heater motor. Where do I need to look next?
This rotating was causing my heater motor to run intermittently.
After tightening the barrel, everything seemed OK. Wiper motor and heater motor both working.
My heater motor has now given up the ghost, although my wipers work fine.
The rubber cover on the spade connector that connects to the ignition switch was a little melted so I spliced in a new connector.
Still, wipers work OK, but no heater motor. Where do I need to look next?