Barten
Active Member
My brakes sticks on after the engine has warmed up, and is binding quite severely. Today I bled my brakes as per the manual, rear and one front side at the time, but that did not help. After testing again and brakes were binding, I jacked up the rear and those were free, then jacked up front and they were both binding. When I stopped the engine I tried the brake pedal, I could hear the hiss from the servo air valve 3-4 times when I pressed in the pedal. After that the brakes were free. So it seems to me like the servo air valve is not releasing the pressure before the engine is off. It is obviously something I don't understand here. I have changed the rubber diafragm but not the valve itself. Maybe the clever Rover p6 community can come to my rescue once again? I have read all I can find about dual brakes but did not find anything just like this.
Regards, Barten
Regards, Barten
Last edited: