anything interchangable?

[jonnydurex]

trying to get hold of the two airfilters and exhaust gaskets for my v8,however the motorfactor i use dont have the p6 listed,do any of the later sd1's or range rovers have the same items?

And are the exhaust manifold studs the same throughout these engines?

Thnx

 

[harveyp6]

V8's don't have or need manifold gaskets, Although any LR/RR ones will fit, the exhaust studs are just ordinary 5/16" UNF studs, and P6 and SD1 air filter elements are different although you can get the SD1 ones to fit by mixing and matching the right P6B/SD1 parts.
Better to go to a specialist P6 supplier I would think.

 

[SydneyRoverP6B]

The air filters for the carburettor SD1 are totally different (as the air cannisters are), so these are not an option.

I used foam airfilters for many years, and found them to be excellent. One set will easily last 10 years. Just clean and re-oil every 20 to 30,000km. They make sets for the 3500 / 3500S.
http://www.uniflow.com.au/

Exhaust manifold gaskets for any Rover V8 of any capacity will fit, as the exhaust ports on the heads over the years only saw subtle changes.

Exhaust manifold studs? Do you mean the bolts that attach the manifolds to the heads? If so, there are some differences, however the link below should be just the ticket. This business below also does manifold studs and nuts if that is what you require, else...

http://cgi.ebay.co.uk/Range-Land-Rover- ... m153.l1262

Ron.