corazon
Well-Known Member
After doing a couple of jobs in the vicinty, replacing lower screen seal and servicing heater, i have now some issues with the wipers.
Since i've owned the car and up until now the delay never worked, but they were fine on both speeds with a good washer squirt.
Now i've replaced the air intake valance and wiper arms etc, they only work on FAST, with a dribble :cry:
There is also considerable more noise: A click when the rod is being pushed, and a occasional, light "grinding" from the drivers side wiper arm.
After reading a few posts about the sponge, i'll be trying that. BUt what's likely to be causing these symptoms?
I've cleaned up the immediate connections to no avail, and the only thing i've noticed visually is some insulating tape has come off a soldered wire..
Thanks
Since i've owned the car and up until now the delay never worked, but they were fine on both speeds with a good washer squirt.
Now i've replaced the air intake valance and wiper arms etc, they only work on FAST, with a dribble :cry:
There is also considerable more noise: A click when the rod is being pushed, and a occasional, light "grinding" from the drivers side wiper arm.
After reading a few posts about the sponge, i'll be trying that. BUt what's likely to be causing these symptoms?
I've cleaned up the immediate connections to no avail, and the only thing i've noticed visually is some insulating tape has come off a soldered wire..
Thanks