Search results

When turning right I get a low pitched rumble noise coming from the front nearside,I have replaced the wheel bearing though the existing one was renewed a few hundred miles ago by the previous owner,I have examined the hub and stub axel for damage,wear,etc but everything APPEARS to be O.K. Has...

My 3500s is losing Brake fluid,I first thought it was the Clutch slave cylinder so replaced it as there were signs of brake fluid around it,but I am still losing fluid not quite as much as before I have checked all the calipers and pipes but no obvious sings of leaks.It was suggested to me that...

As from next year I understand Cellulose paint will no longer be available for DIY car spraying and is to be replaced by water based paint,Has anyone used this yet on a DIY basis,is it DIY user friendly? I have been spraying Classic cars for the last 30 odd years with CELLY,is this the end of...

:( When I bought my 1st P6B three weeks ago the speedo was not working,so I thought it must be the cable,took the cable out sure enough broken at the g/box end,fitted a new cable still no drive from the g/box,cable doe's not turn so I can only suspect that the drive in the g/box is at fault...

:( When I bought my 1st P6B three weeks ago the speedo was not working,so I thought it must be the cable,took the cable out sure enough broken at the g/box end,fitted a new cable still no drive from the g/box,cable doe's not turn so I can only suspect that the drive in the g/box is at fault...

:( When I bought my 1st P6B three weeks ago the speedo was not working,so I thought it must be the cable,took the cable out sure enough broken at the g/box end,fitted a new cable still no drive from the g/box,cable doe's not turn so I can only suspect that the drive in the g/box is at fault...

:( When I bought my 1st P6B three weeks ago the speedo was not working,so I thought it must be the cable,took the cable out sure enough broken at the g/box end,fitted a new cable still no drive from the g/box,cable doe's not turn so I can only suspect that the drive in the g/box is at fault...

I tried to remove the spark plugs on my recently aquired P6 3500s only to find that the walls of the Plug socket I have are to thick to fit the recess in the heads ! ! I have had this plug socket out of a Draper set for about twenty five years and used it on V8 SD1s in the past,Can anyone tell...

The inner Speedo cable on my P6 has broken,I am having difficulty accessing the gearbox end of the cable I have removed the clamp and freed the outer cable but just can't get at the cable as I think part of the inner cable is still in it, Is lowering the box the only option? if so what are the...

The inner Speedo cable on my P6 has broken,I am having difficulty accessing the gearbox end of the cable I have removed the clamp and freed the outer cable but just can't get at the cable as I think part of the inner cable is still in it, Is lowering the box the only option? if so what are the...

The inner Speedo cable on my P6 has broken,I am having difficulty accessing the gearbox end of the cable I have removed the clamp and freed the outer cable but just can't get at the cable as I think part of the inner cable is still in it, Is lowering the box the only option? if so what are the...

The inner Speedo cable on my P6 has broken,I am having difficulty accessing the gearbox end of the cable I have removed the clamp and freed the outer cable but just can't get at the cable as I think part of the inner cable is still in it, Is lowering the box the only option? if so what are the...

My P6 3500s still has the original mechanical fuel pump which takes a lot of engine cranking to fire up,once running goe's fine,however I was wondering should I fit an electric pump to preserve the life of the battery and starter motor OR is there a non return valve I could fit in line to stop...