I got the manifold of my 2000 TC welded several places a couple a years ago. I'm still using it, but now it has a minor crack that i dont think was welded last time.
rgds Petter
I got the manifold of my 2000 TC welded several places a couple a years ago. I'm still using it, but now it has a minor crack that i dont think was welded last time.
rgds Petter
Yesterday, while i had a general look at the carbs and air filters, i suddenly came aware of that the piston in the front carb did'nt move while "blimping" the throttle. First, i noticed that i only heard the sound of air suction from the rear carb, when checking this out i saw that only the...
Yesterday, while i had a general look at the carbs and air filters, i suddenly came aware of that the piston in the front carb did'nt move while "blimping" the throttle. First, i noticed that i only heard the sound of air suction from the rear carb, when checking this out i saw that only the...
Thanks for the response. I have'nt started the job yet, It's still a lot of snow here, and I do'nt drive the car in the winter.
Yesterday I took the car out for the first time this year, It' started as soon as the fuel came pumping. I'll be back when i've started the brake job.
rgds Petter
As I suspect that my brake pipes are no good anymore, along with the discs and brakes front and rear, i'm planning to get it all changed before 17th of May. I'm buying ready-to-fit brake pipes. How complicated is it really to change the rear brakes? I work as an Audi/Volkswagen garage foreman...
I've just had the inlet manifold out, and the engines behavior has'nt changed after this operation, therefore I guess that there's no leak in the inlet manifold. But I've not checked the carburetters. Otherwise the engine runs very well, and I am actually a little impressed of the engines...
I've just had the inlet manifold out, and the engines behavior has'nt changed after this operation, therefore I guess that there's no leak in the inlet manifold. But I've not checked the carburetters. Otherwise the engine runs very well, and I am actually a little impressed of the engines...
The idle, and when running on slow speed is sometimes very lumpy. This makes it difficult to adjust the ignition and it's also very uncomfortable. Could it just be carburetter adjustment. The exhaust also produces small "poff" all the time. The car is equipped with a pertronix electronic ignitior.
The idle, and when running on slow speed is sometimes very lumpy. This makes it difficult to adjust the ignition and it's also very uncomfortable. Could it just be carburetter adjustment. The exhaust also produces small "poff" all the time. The car is equipped with a pertronix electronic ignitior.
Is'nt it wonderful when the hints you get solves your problem? My problem with the front carb was caused by a sticking jet under my front carb. So after some adjustment i've managed to get the right mixture on both carburetters.
Petter :)
Is'nt it wonderful when the hints you get solves your problem? My problem with the front carb was caused by a sticking jet under my front carb. So after some adjustment i've managed to get the right mixture on both carburetters.
Petter :)
As I'm about to become a member of P6ROC, I'm taking the liberty to post a question.
I have a 69 2000 TC, with HS8 carburettors (I believe). Some time ago I bought Gunsons colortune, and it works very well. My problem is that my front carburettor won't produce the blue flame that I want to see...
As I'm about to become a member of P6ROC, I'm taking the liberty to post a question.
I have a 69 2000 TC, with HS8 carburettors (I believe). Some time ago I bought Gunsons colortune, and it works very well. My problem is that my front carburettor won't produce the blue flame that I want to see...
Hi!
Yesterday i installed a pertronix electronic ignition set on my 69 2000 tc, along with a new coil bought from pertronix. It did work very well, and when i'm connected the black wire from the ignitior to the old wire to the tachometer, it all worked. But don't connect the black wire to the...
Hi!
Yesterday i installed a pertronix electronic ignition set on my 69 2000 tc, along with a new coil bought from pertronix. It did work very well, and when i'm connected the black wire from the ignitior to the old wire to the tachometer, it all worked. But don't connect the black wire to the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.