Search results

I more or less have the same problem, put on rebuild rear calipers with new pads on the car, but reading this, and probably this sounds stupid to you guys, but if I operate the handbrake lever long enough it will adjust it self?

It worked roof is in place in less than 15 minutes

Ah that was what I was looking for. Especially how to put the rear lip into the chrome trim. Thanks

Today I have re-vinyled the roof What comes to mind is does the rear screens has to be removed from the car? As it is still in place together with the chrome trim. I bought the car with the roof removed so I’m wondering if I can put it back together with the rear screen in place.

Still fiddling with the electrics of my P6 3500 auto. And managed to tackle most of the issues. Next one comes up. the choke warning light. Today I found out I have a 2 carb manifold without the otter switch. It has the triangle shape where normally the otterswitch is mounted but mine is not...

Yep that was the case. Problems solved. The fuse box was a mess together with combined hot wires (permanent together with swiched hot wires.).

The wire from the starter does not provide the 12 volt. I need to check if this is also the case on the starter. (Maybe a bad wire). The permanent 12volt feed is a white wire with a yellow stripe. The wire from the starte has the same color coding but is a bit thinner. With the ignition switch...

Absolutely. Although the car runs. But cannot switch it off because is always has power to the coil. I already lead a switch controlled wire to the coil but that is being cut of when the starter goes round. On the other hand the wire that has no voltage is probably the wire coming from the...

it is a 3500 P6

Hi, my wire to the coil has always 12 volt no matter if the ignition key is on or off now I understood that the coil gets its 12 volt from the startermotor so my first thoughts were that something was not connected the right way. seems out that it is connected correctly. But on the wire that...

Hi, While working on my Rover P6 3500 series 2 I was figuring out how the electrics works, and I noticed that my dash lights don't work even so non of the warning lights except for the turn signals. Here it comes, I noticed that the wipers only work when the lights are on, same story for the...

Hi Time to introduce myself, just recently bought a P6 3500 Automatic, my first Rover Bought is as a non runner, with some work to do to bring it back on the road Got it running, but yesterday it died on me, here comes the first question and if the mods want me to start a new thread pls let me...