Recent content by petter667

Try Motolita. They supplied my with the correct boss and a 14" steering wheel for my 1972 3500 Auto.

Thanks Dave !! Will investigate this tomorrow. Regards Petter

Last autumn the oil pressure gauge in my 1972 P6 3500 stopped working. I replaced the oil pressure transmitter without any luck. I also replaced the gauge with a NOS item. Now also the fuel and temperature gauge is gone. Also replaced with a NOS item woth no sucsess. The board where the...

If still interested, you can have one for free. Will need your name and adress. Regards Petter

Hi !! I fitted 6X14 Minilites with Conti 195/70-14 tyres. Had to slightly modify rear wheel arches. No PAS, so quite heavy on the steering. You will definately experience the same problems with 15" wheels. Assuming you are fitting 6" wide wheels, you will need to fit 205/60-15 tyres to...

When I bought my car a couple of years ago, it was on on the original shocks from 1973, so I really don't know how a really good set up P6 should be like. On the other hand, i really enjoy driving my P6 with the Koni's. The ride is definately not harsh, maybe a bit more sporting than the...

Fitted Koni Classic both front and rear a couple of years ago. They improved the handling a lot. The car feels much tighter, and I can recommend fitting them. However, you might experience difficulties getting hold of them as Koni is not longer making them for the P6. At least that was what...

Why don't you go for an electric pump. Fitted one to my car. Supplied by J.R. Wadhams. Approx. £ 50,- incl. engine blanking plate. The V8 now fires straight away. Done in less than 30 minutes. :D

Thanks a lot for all your advises. Will try again this weekend. Paid £35,- for the new transmitter at J.R. Wadhams :) :)

Can anyone advise me how to change the oil pressure transmitter on my 73 P6 3500 Auto ? Looks like a failrly straight forward job, but still, I struggle to get a spanner in position to get the old transmitter out. Any advice will be much appriciated !! Petter :) :)

Hi !! Just to inform you all that my foglights are now working perfect, and is wired via the main light switch. fog position. Next to the fusebox (in my car LHD; on the left side, there are 3 wires coming out of the main wiring loom. 2 blue/yellow 1,5mm2 and one red/yellow 2,5 mm2. All...

Thanks to everyone. Will try it out this weekend and let you know. Regards Petter :laugh:

Can anyone advise if the wiring for the optional fog lights are factory installed, and if so, where to connect the lamps. I have recently aquired a set of chrome Lucas square fog lamps, and I am eager to have them working. Regards Petter :laugh:

Thanks a lot John. Seems like a fairly straight forward job which will be done tomorrow. Regards Petter

Thanks a lot John. Seems like a fairly straight forward job which will be done tomorrow. Regards Petter