Recent content by Benlaro

I have changed the BW35 for a LT77 of an SD1. The gearbox fits ok, i have made a complete new exhaust system and it looks fine. But when we changed the pedal box for one with a clutch the problems started. First of all the rod which operates the master cilinder bent when i use the clutch pedal...

Try Berry Smink in the Netherlands, he has some breakers.

I live in Noordwijkerhout, in zuid Holland a few miles away from where you are living according to youre profile. I am rebuilding our P6 completely, for taking part in the Tulpenrally this year. Rebuild the engine, put a manual gearbox in the car, renewing the paintjobs, renewing all the seals...

Im curious how many P6 there are in Holland, i have seen a few around here, and i think i have seen two on the road since i bought mine last year.

Nice looking car.

I agree with that, but it was stil better then all the other shows where they didn't even use a spanner, or show you how to undo the taper. everything fals magicly apart without any tools.

Petty, it was the only show that realy showed some technical stuff. Not all the american shows wich futere a car that apaers to grow by its self. How i must say, by meeting Chip Foose once personaly i must say i think that man is great, he is realy doing lots off the work himself. When i met...

It looks like i have to find a bracket from a SD1.

I know some people on this forum has done the conversion from a automatic to a LT77. I curious how its mounted in youre vehicle, especialy , how the bracket looks like on the end of the gearbox. does someone has some pictures how the solved that?

Just made my own special tool, simpel and it worked great

I have the same tool, but that didn't work either. Sometimes there are special tools like there is for a series landrover. That's why I asked if there is a special tool. I will try a few different ways

I am replacing my steering box of my 1970 V8 LHD for a power steering one. I am trying to remove the steering arms from the drop arm. But I cant reach it with any tools. is there a special tool to loosen the steering arms from the drop arm?

I want to upgrade the wireloom, but I need to find a new one. Autosparks do have them, but only for the right hand drive ones. Is there a company who also do the left hand drive ones? I have a 1970 model 3.5 liters. Im converting it to manual.

This setup is 4 cm lower then the setup with the SU's

I have measured the old one and the new one, there is not much difference in height of the ld setup with the SU's and this one. It looks higher in the picture. I bought the manifold and the Edelbrock at an online auction a few years ago to use in my Defender, but I never gotten to replace the...