Gearbox cooler pipe/Radiator

L

Lister John

New Member
Hi All,

I am in desperate need of an: automatic box oil cooler pipe where it goes into the radiator, The bottom one of the two!

Please pm me if you have one.

Many thanks...John
 
2000/V8? the flexi one?
Its easy to replace the hose,as its not under a great pressure!
Take the hose to a good old style motor factor and they will be able to match it off the roll for a very tight push fit!
Thats what I did with mine,when the fan belt rubbed against it, and wore a small hole,that was 5 yrs ago and its my daily driver,you can always use a small jubillee clip to help secure it!
Another alternative is to find a local connectors and couplings "hydraulic" place,take it to them,explain what its for and they will sort you out!
I had a bespoke clutch hose made up for a kit car,I took them the ends and told them the length needed,it didnt cost me a penny as the guy was a classic nut!. :)
 
IIRC!
The water overflow/return hose that goes from the rad to the carb manifold on the V8 is the same diameter!
Be careful screwing it into the rad,as its easy to strip the thread,do the rad one finger tight first then the one to the connecting pipes!
 
You must log in or register to reply here.
Back
Top