diff extension tube to crossmember mounting

Hmmm. Ok, well the bottom washer is the right way around, but it looks like I am missing the top one (blue line) and the small piece that looks like a smaller washer (red line).

I'll have to get into the garage tonight and investigate.
 

Attachments

  • CIMG6345_zpsfa1679e9.jpg
    CIMG6345_zpsfa1679e9.jpg
    109.7 KB · Views: 621
ewokracing said:
Hmmm. Ok, well the bottom washer is the right way around, but it looks like I am missing the top one (blue line) and the small piece that looks like a smaller washer (red line).
Click to expand...

I take it you mean the spacer between the diff nose and the top washer? Yes you'll need that to maintain correct separation of the diff nose from the mount and I suspect correct alignment of the prop shaft.

Dave
 
Yes, those two washers (the larger top one and the smaller one) are missing off my car. The rubber mount that was in place was also mounted upside down, I suspect whoever did the brakes last didn't really know how to put it all back together.
 
ewokracing said:
Hmmm. Ok, well the bottom washer is the right way around, but it looks like I am missing the top one (blue line) and the small piece that looks like a smaller washer (red line).
Click to expand...
The red line is just the continuation of the upper edge of the washer in the drawing and not a different, separate part.
It's technical drawing-speak for the upper edge of the part and denotes it's shape when viewed in the cut-out as displayed.
 
^ yep, got that, I meant to draw the red line to the sleeve looking thing that acts like a sheath around the locating bolt and raises up the nose of the diff (I guess?).

If anyone has got one of those sleeve things and could measure it, I could machine one here at work. Then I could make another big washer with the indentation.
 
You must log in or register to reply here.
Back
Top