Search results

I've replaced all 4 discs, both front calipers, offside rear caliper and over hauled the nearside rear. I've bled the system 3 times by the usual method, and there is no more air coming out of the nipples. I've raised the car on a jack and confirmed that the front brakes work on both front...

Im overhauling the rear brakes, all went well with the offside BUT the caliper assembly on the near side has seized. It won't swivel. I tried to free up and/or remove the pivot pin, but only managed to round off the nut on the O Ring end and I am in the process of rounding off the hex socket...

Can anyone recommend a supplier of rear brake discs and pads other than the usual Wadhams or Winns

Hi, I've got an oil leak at the point where the prop shaft and pinion extension case meet. I've attached a photo. The oil is splattering around the centre tunnel just above the cross member. I'm assuming that it is the pinion oil seal that is the problem. Assuming that I have identified...

Hi, Im currently doing some minor rust and paint repairs and I have got to replace all four door seals that run around the door aperture. I have already ordered and recieved new seals from JR Wadhams and have two questions that hopefully somebody has answers to :wink: 1) The new seals are...

Hi, The selector cable on my BW65 box needs adjusting as I cant access 'park'; but while I'm doing this I'm changing the nylon spherical bush at the bottom of the lever as the original one seems to be worn and the lever is sloppy. I purchased a new bush from JR Wadhams and upon removal of the...

Hi, I hope someone can help. I already have the factory workshop manual and parts book but I'm trying to get my hands on a Haynes manual for the 3500/3500S. If anyone has an unwanted copy I would be very interested in buying it from you. Many thanks Rob