Search results

Hi the compression test was conducted on each cylinder and done seperately with the spark plug removed, but with just a quick burst from the ignition.

Hi, yes, the same engine and the range is across all eight cylinders

What would be reasonable compression figures for each cylinder on a V8? I have several readings, all taken from a cold engine, ranging from 90 > 130 psi. Would the compression figures improve when the engine is hot? Many thanks!

I guess this subject comes up evry once in a while, but I was wondering what the latest cure would be regarding bubbles forming on the aluminium bonnet and boot? I had my bonnet etch primed only last year to remove one bubble, but now at least eight others have miraculously grown like mushrooms...

Hi Robin there is one part missing from your photo, which is the boot stay bracket. I have one which has been refrabricated from an old one and has been etched primed. All you need to do is put a finish coat of paint. Let me know if you need this part. Gary

Thank you Gentlemen!

Hi Ron that's where the material is located, but I think I have heard it called by another name?

Vinyl Card inside the boot? I am not sure what the name of this material is called and is still manufactured and where could I source it from? Is there is another alternative material available? Your replies are always appreciated!

The seller on the auction has added that the seats are Ambla and not leather, but how can you tell the difference between leather, ambla and vinyl?

Alternatively, it may have been used as a company car for that period and for some reason, not required and then sold onwards? (at a bargain price) What was the economy like at that time and how were Rover doing? Wasn't that a period of unemployment, strikes and high interest rates? All of the...

I bought a new car ten years ago and it had been pre registered with the dealer, so I was the second owner. It had twelve miles on the clock and was owned less than a month by the dealership. I discovered that this was very common to get "end of month" sales up. The dealer knocked £4,000 off the...

Could be Tokyo!

Hi and thanks for you comments. The first registered owner was British Leyland dated 30th January 1974. It stayed with them for just four months and then sold onwards. The second owner had the car for nineteen years! (I am the eighth owner since first registration). It was originally Tobacco...

I have a Rover P6 V8 Auto and I am based in Cambridge. I bought the car "blind" from Ebay two years ago and completely trusted the sellers description. When I went to pick up the car, the sellers condition was pretty accurate, so I paid the balance and drove her back up to Cambridge. Over the...

Can anyone tell me please what is the best manual for the P6 regarding parts and installation, especialy with diagrams. I am trying to instal the continental boot mounting kit and although I have seen several manuals, none of them have this section. Many thanks!

Many thanks to all of you who replied! I've removed the seats, (top and bottom), removed the rear seat belts, removed the side vinyl panels (which had to bent outwards to move over the top of the "pyramid" shaped welded "stay", I HOPE they can be reshaped and returned!) and finally the last two...

Many thanks CDNP6!

Harvey, thank you. Are these screws located behind the vinyl panel inside the car? I have a few manuals, but this procedure isn't shown.

Has anyone ever removed the rear side panels located next to the doors? I can see three screws on the inside part of the panel (when the rear door is opened) but when removed, the panel(s) won't budge!