Recent content by stephendavies

hi folks, still got this problem, fitted a modification spring but the only one I could find was rusty and quite thin in one spot, this has now perished completely so I need one of these modification springs again, this is definitely the cure but getting my hands on a good spring is proving a...

Any one know where I can get the modification spring, it's doing it again

Re: Brakes locking upa Been there with this fault, I bought a servo off eBay with a view to overhauling it for a spare, it looked in better condition than the one fitted to my 2.2 tc , so I fitted it only to find this fault, after comparing the two servos I found that the Niro type spring in...

I was right the new pulley is no good, put the old one on an no more squealing

I think the old pulled is going on, the new alternator has a turned pulley with a flat bottom in the vee it looks like the belt is bottoming out on the flat bit, it's a new fan belt but it looks a bit small for the new pulley

Thanks for that Tony I put my new cheap replica alternator in, it seems to work fine, but it was a cheapie replica, doesn't have the suppression capacitor inside or the big single diode/or thermal cutout in it. Only thing it squeals like hell for a bit when the car is started, think its going to...

I have the same thing, just fitting new alternator, going to just insulate it but what did it do.? The old alternator has four wires coming out of the regulator! The new one is a cheapie non Lucas replica but it should be ok, I hope, just putting it in now ,hopefully everything will work

I think there's a fault wth my keyboard:)

The sound qualty s not bad but it can be effected by which way up the cassette thing is, I guess tape head aglinnment , the battery n the thing is not very good, so it helps f you have a cassette player where the end of the tape sticks out to connect the power lead, butsayng that they are cheap...

still not fixed this,and it still dous it, but only on exeptionally hot days, not had many of these :cry:

How about one of these gizmos. got one in my 2200tc works great with a vintage sharp radio cassette http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0939986906

Sorry ................I thought you meant the clinch nuts and screws at the rear valence to wing

Thanks for the help guys...good here init

http://www.bresco.com/

Bresco have both these http://www.bresco.com/