Recent content by adamjack

Hi Folks Has Tony Buntings E-mail ben hacked ? As I am getting the occasional E-mail from him ,that has a suspisious link Best Regards Adam

I was planning to remove the sender unit first ,I don't fancy trying to solder a leaky sender unit ,lying on my back with a hot soldering iron in my hand ,and petrol leaking out !! Can you use just a normal soldering iron ? Thanks .

Good Day folks My fuel sender has developed a leak from one of the joints . How easy is it to resolder the joint ? and do I need any special tools ? Or will a soldering do the job ? Many Thanks Adam

They do just pull off ,they are a tight fit !!

Hi Folks Does anyone know how to remove the button from the side of ET headrests ? Do they just pull off ? Thanks Adam

Hi I am after some of the waist finishers that go at the end of the door window frames ,part numbers 364542/364541 & 364529/364530 ,I have had a good search ,but no one seems to make them. Thanks ,Adam

Sorry to resurrect an old thread ,but I am after the same parts ,does anyone make them now ?

It turns out it was a knackered tyre !!! Thanks for your help folks .

I will give this a try ,as the car hasn't had much use over the last few months maybe one UJ is sticking ,they have all been replaced in the last five years or so ,so they are not worn .

It turns out it isn't a tyre and doesn't seem to be related to fuelling issues ,it feels more like a propshaft balance problem .

Mystery solved ,it is all down to a miss-shaped rear tyre ,that will teach me to buy budget tyres !!

I had the regulator set at 5 PSI ,but I will check again as it has been a while since I last checked it

Hi Folks ,thanks for your help ,I will have a look at the weekend Cheers !

What would cause this ,could it be a Fuel pressure issue ? as I have a Webber 500 fitted and moved the fuel pump to the rear ,thanks Adam

Hi Harvey It is a 1972 3500 converted to 5spd manual ,it feels like the issue is coming from the rear ,not the front of the car ,it is difficult to explain ,I had the UV joints replaced a few years ago ,so I am wondering if it is a balance issue with the propshaft .