When I replaced mine, I cut them square to match the original seals.Does anyone have a photo of new sill seals in place.
Seals are supplied longer than the 'raised' section on the sill. I assume they need to be cut down to size.
Are the ends just finished square or do they need to be shaped to blend in with the door seals?
Hi Paul,hi
can I ask how you have attached these as they look very neat
TIA Paul
I ran the new door seal all the way around and then cut out the section for the sill seal so I would have an exact fit. The sill seal is held in place by putting it in the track AND with a metal seal retainer strip. I cleaned and re plated the seal retainer and then screwed it into place as per the original installation.Hi
I guess mine have been bodged a bit
are yours riveted or screwed on mine fit in a track
and don’t look right
thanks for the reply regards Paul