waist finishers

christmas

New Member
Please has anyone got any waist finishers,the part numbers are-364542/364541 & 364529/364530.NOS or good second hand would be OK,they are for a 3500s 1975.
Thank you Trevor.please call 01484 519448.
 
Thank you for your reply,I have the door/window rubbers thanks,its the small rubbers that fit in the ends of the tops of the doors to stop water going down in to the door bottoms,that I am wanting.thanks trevor.
 
I think that you and every rover P6 owner would love a set of nos ones or even good s/h!
There is a possibility that a supplier may be getting some reproduced,but dont know the timescale.
If you have the angled metal bit,then its possible to fabricate,glue up, your own using a slice of the same type of rubber as is used on the wing-door seals.
 
I made some out of black gasket cement. I put some masking tape down first and then putty knifed some casket goo over the tape until I had the right "Look".
The gasket goo set and it works just fine insofar as keeping the weather out.
The masking tape just meant it doeasnt stick to the stainless window frame thats all, plus it gave me an edge to work along
 
I made some out of black gasket cement. I put some masking tape down first and then putty knifed some casket goo over the tape until I had the right "Look".
The gasket goo set and it works just fine insofar as keeping the weather out.
The masking tape just meant it doeasnt stick to the stainless window frame thats all, plus it gave me an edge to work along

I did the same but with some butyl sealant - Soudal Butyrub 310ml - £2.55 +VAT : Trade Grade Products Ltd - The Glue People, Innovation in Adhesion

This stuff will dry on the surface so won't 'pick up' on clothes etc.
 
Back
Top