Mikep said:Very impressive Stan. This is a job I want to undertake as a precaution, so I will use this as a guide
redrover said:Top job, Stan! And very neat solution. I'll also be using this as basis for a replacement.
Could I mount multi-blade connector blocks away from the fusebox to give a little more clearance? Perhaps up on the underside of the dash top above the glove box?
Michael
vaultsman said:...but the loom as it comes through the cutout is quite rigid
MUNKSJOE said:Blimey Stan you are a genius. A while back I asked if it was possible to post a few pictures as I was going to attempt the same and what have you came up with, a step by step guide in words and pictures including the correct blade fuses to use, how much and what materials to buy and where from.
I can now get stuck into this job (which I have been scratching my head over and dreading for ages) with great confidence all due to your excellent tread.
Thank you for your help.
Regards
Alan
Sorry to hear of your woes....it's no consolation, but you won't be the last. Without scaremongering, I believe all Series II owners should be taking the plunge on this.
Good luck with the journey, and tackling the job....shout up if you need to!
Stan