PepijnWK
Active Member
As the title suggests i have sticky brakes. As soon as I hit the brakes 2 or 3 times the pedal gets really firm and the brakes tend to stick. In my opinion it is al four brakes. The brakes are all new calipers.
I have a 3500 of 1976. It has a dual system and the airvalave is not mounted on the servo but on the master cilinder. If i release the air valve things are right again but after hitting the brakes and revving the engine they stick again. There is quite a vacuum on the aire valve! really have to apply some effort to lift the valve.
servo:
airvalve on master cilinder:
remove the cap to release the pressure:
I hope that someone could point me in the right direction!
thanks in advance
I have a 3500 of 1976. It has a dual system and the airvalave is not mounted on the servo but on the master cilinder. If i release the air valve things are right again but after hitting the brakes and revving the engine they stick again. There is quite a vacuum on the aire valve! really have to apply some effort to lift the valve.
servo:
airvalve on master cilinder:
remove the cap to release the pressure:
I hope that someone could point me in the right direction!
thanks in advance
Last edited: