Sill screws

Phil Robson

Phil Robson

Well-Known Member
I’m getting quite short of the outer sill screws & wonder if anyone can please tell me what they are & where I can get some (if still possible).

IMG_1180.jpg
Thank you
 
Note they're pozi drive so use a pozidrive screwdriver tip. there is a second peak inside the valley that fits the cross marked in the head
 
DaveRover3500s said:
If I don’t have enough I can get by close Friday send on!

Dave
Click to expand...
Thanks Dave.

I need 6 or 7 spares please as my 3 P6s all have 1 or 2 missing!

Thank you Colnerov & Mikecoombs for the info. I might have to get some - they’re cheap enough, but I don’t know if I want 1,000 knocking about….
 
Phil I defo got 5 or 6 I can send to you no problem. I think the bottom ones are different size to the top ones? If you could have a look on parts book and let me know I will get over weekend and post them Monday for cost of postage!

Dave
 
Vern Klukas said:
The bottom screw is the above pic. Top screws should be 10/32 machine screws into nutplates. Unless I'm missing something here.

Vern
Click to expand...
That came out of the top of the sill, Vern & they do screw into nutplates.

The bottom ones are ‘self-tapping’ type screws that go into plastic plugs located in the square holes in the middle sill.
 
Hi Phil. Yep Vern and yourself both correct of course. I have some spares of both types - the bottom ones with the nylon inserts as well Winns did sell them (I got some a good while back along with stainless steel top ones) but I checked recently for someone else and now seem to only stock top ones).

Will fish out 6 of each for you and get sent off Monday.

Dave
 
You must log in or register to reply here.
Back
Top