1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Series 2/ 1 doors

Discussion in 'Rover P6 Bodywork & Interior' started by Colin T, Jul 13, 2018.

  1. Colin T

    Colin T New Member

    I have a series 1 with some poor doors. I have only seen series 2 around for sale.
    What are the differences between them?
  2. colnerov

    colnerov Well-Known Member

    Hi, The only difference to the door shells is the series 2 has a series of holes for the side trims, but they can be welded up carefully. The window frames are appointed differently but but are interchangeable in the shells.

  3. RCoS105

    RCoS105 New Member

    Hi, dont forget the "anti burst device" (as I did when I shifted a rotten series 2 door for a series 1). I had to cut out that part of the series 2 door and weld the "anti burst" to the series 1 door. I dont think You will have the same problem as I had (The series 1 door "jammed" with the anti burst on my series 2 car) but it is still a different look.

  4. Colin T

    Colin T New Member

    Thanks for the advice

Share This Page