Sd1 Clutch Pressure Plate Required

[The Rovering Member]

The 2000 item which may fit the 2300/2600 too. Can someone confirm that please?

NOS preferred. Thanks

 

[colnerov]

Hi, Checking on here

http://www.spagweb.com/v8mini/tech_files/clutch_QH08.pdf

If you scroll down to Rover for the SD1 it says -

2000 is 216mm dia with 25.4mm -23 spline.
2.3 and 2.6 is 231mm dia with 25.4 - 23 spline.
3.5 is 241mm with 25.4 - 23 spline.

However if you scroll up to Ford for Sierra and Granada they have 215mm with 25.4 - 23 spline. So that will broaden you area of search.

Colin

 

[harveyp6]

^^^ That is really useful info. I was sure that they were different sizes, all the ebay listings say their clutches do the entire 2000=3500 range.

 

[The Rovering Member]

Thanks very much, Colin.

 

[colnerov]

^^^ That is really useful info. I was sure that they were different sizes, all the ebay listings say their clutches do the entire 2000=3500 range.

Hi, The 6 pots and the V8 both use the same pressure plate it's just the centre plate that's different, according to the part Nos.

Colin

 

[jp928]

Whats the difficulty getting a pressure plate? Just that you want NOS? I ordered and paid on line for a v8 one for my project (amassing lots of parts - hope I get it finished?) recently as it was cheap (but common make) - they were out of stock, no prospect of getting one soon, so they gave me an up spec Exedy unit at same price. Winner!

 

[The Rovering Member]

LT77 in a four-pot.