retrofit oil pressure and oil temperature

Jorgenson

Member
I would like to retrofit oil pressure and oil temperature. I should know what kind of screw thread this is.
Please take a look at the attached picture.
 

Attachments

  • index.jpg
    index.jpg
    393.5 KB · Views: 26
Hi, The oil pressure galleries are ½" UNF. Without going out to the workshop, I'm about to have my dinner, I don't know the other one's size. In the past when I've fitted a oil temp gauge I have fitted the sender bulb into the side of the sump.

Colin
 
have an SD1 oil pump cover here. The larger sender (gauge?) is parallel, 20 tpi, 1/2", looks like needs a washer to seal it. Small device looks tapered, is 18 tpi, approx 1/2". The oil gallery drillings in the cover are 1/2".
 
Back
Top