Project T Rex

I don't now how but I have lost the pictures for the repairs of the rear inner sill computers not my thing.
So as you can see I have cut off the D post and inner part of the D post and also repaired part of the wheel arch.
Hope I have got the new D post in the right place bit late now. I did take several measurements first.
Paul
 

Attachments

  • 20191124_133042.jpg
    20191124_133042.jpg
    1 MB · Views: 44
  • 20191124_143302.jpg
    20191124_143302.jpg
    2.5 MB · Views: 46
  • 20191208_150314.jpg
    20191208_150314.jpg
    2.5 MB · Views: 45
  • 20191208_174506.jpg
    20191208_174506.jpg
    2.3 MB · Views: 44
  • 20200322_171211.jpg
    20200322_171211.jpg
    2.3 MB · Views: 42
  • 20200322_171231.jpg
    20200322_171231.jpg
    2.3 MB · Views: 39
  • 20200329_152856.jpg
    20200329_152856.jpg
    2.4 MB · Views: 41
  • 20200406_151437.jpg
    20200406_151437.jpg
    2.2 MB · Views: 38
  • 20200406_163724.jpg
    20200406_163724.jpg
    2.2 MB · Views: 39
  • 20200411_112441(0).jpg
    20200411_112441(0).jpg
    2.3 MB · Views: 41
I don't now how but I have lost the pictures for the repairs of the rear inner sill computers not my thing.
So as you can see I have cut off the D post and inner part of the D post and also repaired part of the wheel arch.
Hope I have got the new D post in the right place bit late now. I did take several measurements first.
Paul
How did you find lining up the door as I'm going to be doing the same on mine too.
 
Hi stue though you had gone missing in action as not seen you on YouTube glad you are well.
When I fitted my D post I took measurements from the C post to the D post and took measurements from the inner wheel arch to the D post.
I used self tapping screws to hold it in place then refitted the door and striker and when I was happy wield it in place.
Also don't forget to remove the striker plate captive plate retainer and fit to the new D post good luck.
Paul
 

Attachments

  • 20200728_184729.jpg
    20200728_184729.jpg
    915.1 KB · Views: 22
  • 20200729_215521.jpg
    20200729_215521.jpg
    3.3 MB · Views: 22
Hi stue though you had gone missing in action as not seen you on YouTube glad you are well.
When I fitted my D post I took measurements from the C post to the D post and took measurements from the inner wheel arch to the D post.
I used self tapping screws to hold it in place then refitted the door and striker and when I was happy wield it in place.
Also don't forget to remove the striker plate captive plate retainer and fit to the new D post good luck.
Paul
Thanks for the info.
Glad I havent cut it out yet then .lol.
Have been on holiday so haven't been over there much and havent filmed anything the last couple of times I have been over.
Will do an update soon.
 
Back
Top