Re: Project....Northern Soul
I really like the interior work you've done there. Well in keeping with what the team at the Rover Co would have done had they been working today. I also like the wing flair. But I'm not quite so sure about the 1/4 panel. I can't think of a good us for the captured air, so it upsets my engineers functionality requirement1 All in all, really excellent work.
I see what you've done with the suspension arm. That isn't the weak component in the back suspension though. The weak point is where the upper, rear facing, arm attaches to the de dion elbow. The two flanges on the elbow that the bar bolts between need to be double plated - they corrode and drop away leaving the entire suspension on the floor! Also, make quite sure that the mountings for that bar against the boot side are strong from both sides.
Chris