P6b project

stue1972

Active Member
Where will you be mounting the clutch master? Next to the brake master, or vertically like the 3500S? I had a lot of fun making up the brackets to mount a vertical slave, which are not present on the auto base unit.
What are you using as a rear crossmember? Will you be re-using the brackets in the auto tunnel?
I adapted an SD1 crossmember to the auto brackets. I have photos of my contraptions if you need.
I had to trim some metal away to get the three-pedal box in the hole. I didn't use any gasket material between the pedal box and the bulkhead. That was stupid. Rain gets in if I park at a certain incline facing up hill. Damn and blast.
I have the pedals and all the bits from an s for the master and will cross the bridge for the Crossmember when I get that far but have the auto and the sd1 member to play with.
That was a bit of a mistake not fitting a gasket, I'll be sure I do.
 

stue1972

Active Member
Rear axle removed this week and a nasty trailing arm discovery. Then on to stripping the underseal.
That's probably going to take me the next couple of weekends IMG_20201010_182627_427.jpg IMG_20201010_182627_482.jpg IMG_20201010_182627_428.jpg IMG_20201010_182627_430.jpg IMG_20201010_182627_474.jpg IMG_20201010_182627_484.jpg
 
I love your work and dedication stue. I am now a long way behind you now
I am finding it hard to find the time at the moment but I no I will get there in the end and will be worth it.
 

stue1972

Active Member
I love your work and dedication stue. I am now a long way behind you now
I am finding it hard to find the time at the moment but I no I will get there in the end and will be worth it.
It is hard to find the time sometimes.
I try to dedicate one day a week but been off the last week so had a bit of extra time.
 

stue1972

Active Member
Looks great Stu! very clean indeed, it's like big ..YES.. once all the underseal if off, all starts to get better with repainting and refitting bits :thumb::)
It's not looking to bad, not really found anything I didnt already know about.
Be nice to put some bits back on. Seams all I do is keep taking more off.
 
Top