cobraboy
Well-Known Member
The wings on my car are Honeybourne. With GRP you have to expect to nip and tuck in order to get them right. The fronts were not bad apart from the bottom 4" where they come down to the sill, they were too short and the last little kick was at the wrong angle. I cut the end off and spaced it apart and set the angle right.
The rear was wrong at the area where it tucks under the sail panel so this had to be cut and re worked.
I would have liked the gap between boot lid and wing to be tighter, at one stage it was not bad but after I went and added the arches it drifted a little wider.
So to sum up. They are not a bad product, but don't expect to throw them on in a morning.
The rear was wrong at the area where it tucks under the sail panel so this had to be cut and re worked.
I would have liked the gap between boot lid and wing to be tighter, at one stage it was not bad but after I went and added the arches it drifted a little wider.
So to sum up. They are not a bad product, but don't expect to throw them on in a morning.