P3/75 air cleaner/silencer.

I notice my air silencer looks clogged and grotty, how would i go about cleaning this monster. could i cut the end off and remove the inside clean and then replace the filter element and reattach the end. any advice would be appreciated.regards Derrick.Smith.
 
The inside is basically knitted wire mesh such as made for cooking pot scourers. If you can find some locally , you could dismantle and refill with new innards such as .» Knitted Mesh (knitmeshtechnologies.com The original knitted material was made by Spong, in London and I remember visiting then when I worked for Rover Group , as its used in engine breathers.
 
Last edited:
The inside is basically knitted wire mesh such as made for cooking pot scourers. If you can find some locally , you could dismantle and refill with new innards » KleenKnit™ Pot Scourers (knitmeshtechnologies.com) . The original knitted material was made by Spong, in London and I remember visiting then when I worked for Rover Group , as its used in engine breathers.
Thanks for that information, looks like the way to go to keep it original.regards Derrick.Smith
 
Back
Top