P3/75 air cleaner/silencer.

#1
I notice my air silencer looks clogged and grotty, how would i go about cleaning this monster. could i cut the end off and remove the inside clean and then replace the filter element and reattach the end. any advice would be appreciated.regards Derrick.Smith.
 

roverp480

Active Member
#4
The inside is basically knitted wire mesh such as made for cooking pot scourers. If you can find some locally , you could dismantle and refill with new innards such as .» Knitted Mesh (knitmeshtechnologies.com The original knitted material was made by Spong, in London and I remember visiting then when I worked for Rover Group , as its used in engine breathers.
 
Last edited:
#5
The inside is basically knitted wire mesh such as made for cooking pot scourers. If you can find some locally , you could dismantle and refill with new innards » KleenKnit™ Pot Scourers (knitmeshtechnologies.com) . The original knitted material was made by Spong, in London and I remember visiting then when I worked for Rover Group , as its used in engine breathers.
Thanks for that information, looks like the way to go to keep it original.regards Derrick.Smith
 
Top