MGBD

I have bought parts from MGBD and was very pleased with the quality and reasonable prices.

Delivery was excellent and you can rely on the knowledge of the people there.

Wholeheartedly recommend them

Richard
 
This coming weekend, we will be at Bressingham.
If you are attending and want too save shipping costs, please order through our webstore and select the collect at Bressingham delivery option.
 
We have been asked so many times now, that I have added a pictorial guide to rebuilding a rear P6 Girling caliper onto our website at

http://roverp6parts.com/roverp6rearcaliper.html

The keen eyed amongst you will note that the caliper is actually a Mark 4 Zephyr/Zodiac version of the rear Girling caliper and doesn't have a P6 handbrake cam arm because this pictorial guide was initially done some time ago for one of our Zodiac customers.
 
MarkGray said:
The keen eyed amongst you will note that the caliper is actually a Mark 4 Zephyr/Zodiac version of the rear Girling caliper
Click to expand...

Plus very early internals: The spacers on the posts and the early block.

I haven't rebuilt one using those parts for years, I always put the later bits in.

Nevertheless lots of nice pictures giving a good idea of how it all goes together.
 
I've not been able to look at this yet as it won't work on any of my mobile devices. Is it any different from the sticky in the "brakes" section, that quattro did?

Dave
 
It's a series of photos showing the reassembly process from a bare caliper body up to the completed unit, so it will be covering the same ground as Quattro's thread, but with the early internals.
 
Works fine on a proper computer. :wink:
And you can see the pics better on the large screen. :)
 
Hi
As of 05/06/2015, we have Three Rover P6’s For Sale on our website at
http://www.roverp6cars.co.uk/carsforsale.html

One of the cars was used in the TV Series 'Inspector George Gently' and comes complete with some original scripts which detail the car's use on set.

Please note, we advertise Rovers For Sale on our website Free of Charge and without any commission on the sale, as a Free service to the Rover Community and therefore as a company we do not benefit financially from the advert or the sale of the vehicle. Our aim in this service is purely to rehome Rovers.
 
Message to all of our customer who have purchased brake servo vacuum hose from us , this applies to part numbers 578081, 578082, 578084 purchased since February 2014.
Please can you examine the hose thoroughly because we have had one customer reporting that it has turned to jelly.
Anyone finding this issue with the hose please contact us. on +44 (0) 1902 689975 immediately.
Thank you
 
MarkGray said:
Message to all of our customer who have purchased brake servo vacuum hose from us , this applies to part numbers 578081, 578082, 578084 purchased since February 2014.
Please can you examine the hose thoroughly because we have had one customer reporting that it has turned to jelly.
Anyone finding this issue with the hose please contact us. on +44 (0) 1902 689975 immediately.
Thank you
Click to expand...
 
Rover P6 Portugal 1st National get together and lunch.
All P6’s welcome Original/cosmetically challenged/modified/etc
Saturday 2nd September 2017 12.00 bst
Barragem do Cabril, 3270 Pedrogao Grande, Portugal

Sponsored by MGBD Parts

For further details contact roverp6portugal@mgbdparts.co.uk
 
DUE TO A CLOSE FAMILY MEMBER WHO IS GRAVELY ILL IN HOSPITAL, WE ARE CURRENTLY STRUGGLING TO KEEP UP WITH COMMUNICATIONS BOTH PHONE AND MORESO EMAIL. ALSO THE DISPATCH OF SOME ORDERS HAVE SUFFERED, ESPECIALLY THE IN-HOUSE REFURBISHED PARTS, eg Calipers, Servos etc. UNFORTUNATELY OUR PROBLEMS ARE EXACERBATED BY THE 70 MILE ROUND TRIP TO THE HOSIPTAL AND EXTENDED VISITING HOURS. We are however endeavouring to dispatch all orders as PROMPTLY as we possibly can but we please ask for your patience during these very trying times.

THANK YOU FOR YOUR CONTINUED SUPPORT.

Mark & Angie Gray, MGBD Parts
 
MarkGray said:
DUE TO A CLOSE FAMILY MEMBER WHO IS GRAVELY ILL IN HOSPITAL, WE ARE CURRENTLY STRUGGLING TO KEEP UP WITH COMMUNICATIONS BOTH PHONE AND MORESO EMAIL. ALSO THE DISPATCH OF SOME ORDERS HAVE SUFFERED, ESPECIALLY THE IN-HOUSE REFURBISHED PARTS, eg Calipers, Servos etc. UNFORTUNATELY OUR PROBLEMS ARE EXACERBATED BY THE 70 MILE ROUND TRIP TO THE HOSIPTAL AND EXTENDED VISITING HOURS. We are however endeavouring to dispatch all orders as PROMPTLY as we possibly can but we please ask for your patience during these very trying times.

THANK YOU FOR YOUR CONTINUED SUPPORT.

Mark & Angie Gray, MGBD Parts
Click to expand...

Go well you two
Im sure everyone will understand
Hope everything turns out for the better
Gerald
 
Does anyone know if Mark and Angie have resumed trading after their family illness? I know that their e-commerce site is still up and running but I have orders now outstanding for more than 6 months and get no response to emails. Thanks.
 
Got a head gasket set from them last week. I know they are in Portugal this week for an annual Rover show there.
 
You must log in or register to reply here.
Back
Top