jp928
Well-Known Member
Series 2, 74, D chassis. Putting LEDs in the dash, testing each as I go. Indicators have LEDs in the lamps, and have always flashed slowly. RH arrow bulb stays on, no sign of flashing, works OK with original bulb. LH arrow with LED, nothing. Anyt suggestions ? While I am here, what was the blck tape (with some sort of fibrous backing) along the top of the front plastic cover about? It was visibly curling, looking bad, with old age probably. Instrument panel doesnt want to come out - 2 philps head screws at the RH end need to come out? And one nut up under the cap? Noted before that the instrument removal (88.20.01) for strip speedo says to remove top facia rail (75.46.04) at step3; at 76.46.04 step 3 it says remove Instrument panel for circu;lar speedo models...???
thanks
Edit - got it out enough for what I want to do - pulling rightwards, wriggling. Cleaning the inside of the front cover is a pain - lots of wiping, trial in place, find more dust, clean again. Now to tackle the indicator problem.
thanks
Edit - got it out enough for what I want to do - pulling rightwards, wriggling. Cleaning the inside of the front cover is a pain - lots of wiping, trial in place, find more dust, clean again. Now to tackle the indicator problem.
Last edited: