Hi this is my first post on this site since 2011 so please excuse me if i seem a tad rusty.
After a long time searching i have just bought a very nice 1969 series 1 3500 p6, the problem i have is the ignition warning light does not work(yes the bulb is ok)
The battery is charging when i check it with my multimeter with the engine running so the alternator seems ok ,could the culprit be the ignition warning light relay? and if so where is it located? i can see the 4tr control box and the relay for the alternator but i cannot find the warning light relay.
Also when i remove the bulb from the ignition light holder on the dash and with the ignition switched on when i put the probe of the multimeter into the base of the bulb holder and the other probe to earth i get a reading of 12.6 volts! so why does the bulb not light?.
Sorry if the post is a little long but i wanted to try and give as much info as possible
Other than the above the car is FANTASTIC.
Many thanks RHL.
After a long time searching i have just bought a very nice 1969 series 1 3500 p6, the problem i have is the ignition warning light does not work(yes the bulb is ok)
The battery is charging when i check it with my multimeter with the engine running so the alternator seems ok ,could the culprit be the ignition warning light relay? and if so where is it located? i can see the 4tr control box and the relay for the alternator but i cannot find the warning light relay.
Also when i remove the bulb from the ignition light holder on the dash and with the ignition switched on when i put the probe of the multimeter into the base of the bulb holder and the other probe to earth i get a reading of 12.6 volts! so why does the bulb not light?.
Sorry if the post is a little long but i wanted to try and give as much info as possible
Other than the above the car is FANTASTIC.
Many thanks RHL.