A conversation I fear I will also be having sometime this week, as my recently fitted front discs seem to be as warped as the ones hey were replacing, after less than a thousand miles. Does anybody know where I can get quality EBC ones?
I did my first long trip today after fitting the EBC discs. There’s an occasional vibration under braking. Not every time though, so more investigation required before I blame anything.
I had an 0.011" runout on a rear disc, I marked its location, removed it, spent a long time cleaning the disc and output flange and re fitted it 180 degrees round. The runout reduced to 0.003".
I would certainly try this on front discs. It does not take much corrosion in between the disc and mounting to cause a problem.
Obviously if the disc has a high spot or metallurgy issue this wont help.
You don't have to send a fortune to get a piece of kit to help sort it. https://www.amazon.co.uk/Indicator-...ocphy=1007127&hvtargid=pla-419506747622&psc=1
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.