fresh air intake

Ricco

New Member
hello for those who could be interested in fresh air intake i found on revotec.com (but trough a french dealer a silicon hose with the right size to fit with air box and i added with isolation titane band like i did on my old bonneville. It makes quite a difference
1787853969978.png
 
Hi ricco

Looks interesting- what difference did it make? I am running stock intake with larger SD1 air filters in my P6 air box and all seems well, picks up great idle is great and even during this years hottest days of near 40 degrees she did not faulter, splutter or complain even in heavy stop start traffic. So I just want to know what difference v standard set up- better MPG? Better starting?

Dave
 
I too have the larger SD1 filter box with Ryco A1705 filters, in my P6.
Performance is noticeable with this set up, so am wondering if the wrapping would improve it more . It would take away visually from my highly polished elbows too.
Just sayin.
 
I investigated the idea of using a cold air intake back in the late 1980s. Being exposed to fresh air, the hose is also exposed to water. Any water from large puddles that is drawn up through the hose and into the engine will destroy the engine as water is incompressible. Bent connecting rods will result at the very least. That alone convinced me that the negatives totally outweighed any benefits which on a road going standard Rover V8 would be next to zero.

Ron.
 
I have an air duct to the cleaner inlet from the near side cavity behind the lights, and subjectively I think it helps in hot weather. I seriously doubt any significant water could reach the engine, considering that said hose is a loose fit on the air cleaner inlet, and there is the space inside the cleaner for it to drop out of the air stream, and then it would have to get through the filter.
 

Attachments

  • IMG_0894.JPG
    IMG_0894.JPG
    2 MB · Views: 7
NADA scoops have a dam and water outlets on the side to keep water out. most scoop setups have some means of avoiding or getting rid of the water. NADA also has a valve in the bottom of the aircleaner. Land rover Series three have a pickup on the guard side for fresh air.

Water issue isn't really rain its when someone else drives through a puddle and dumps huge amounts of water over your car...or when driving across creeks or flooded roads
 
Hi ricco

Looks interesting- what difference did it make? I am running stock intake with larger SD1 air filters in my P6 air box and all seems well, picks up great idle is great and even during this years hottest days of near 40 degrees she did not faulter, splutter or complain even in heavy stop start traffic. So I just want to know what difference v standard set up- better MPG? Better starting?

Dave
Hi Dave, i would say better behaviour during hot days, better acceleration and start in fact.
 
I was speaking to my friend Johnny the fox and he explained some of the science behind it and the mods the SD1 had to assist both cold starting and warm up and getting cooler air drawn into carbs - makes sense! Certainly a mod I would consider for future.

Dave
 
NADA scoops have a dam and water outlets on the side to keep water out. most scoop setups have some means of avoiding or getting rid of the water. NADA also has a valve in the bottom of the aircleaner. Land rover Series three have a pickup on the guard side for fresh air.

Water issue isn't really rain its when someone else drives through a puddle and dumps huge amounts of water over your car...or when driving across creeks or flooded roads
If anyone needs the 3 dams as I did, there is a guy in New Jersey -Additive Restoration LLC - that makes them for about $100 USD.
 
Not so new...spent the last 2 years in the shop with a P6 and the missing dams were among the last things I learned about. But, looks like this is old news.

We just got the engine running. Complete overhaul by Thayers in Levant, Maine. Unbelievable sound.

Still, I tried.:thumb:

Aha, I see you are the manufacturer! Thanks for the great communications. Just received it. Very impressed. I will tell the shop about your products. They get a lot of interesting cars in there
 
Last edited:
Not so new...spent the last 2 years in the shop with a P6 and the missing dams were among the last things I learned about. But, looks like this is old news.

We just got the engine running. Complete overhaul by Thayers in Levant, Maine. Unbelievable sound.

Still, I tried.:thumb:

Aha, I see you are the manufacturer! Thanks for the great communications. Just received it. Very impressed. I will tell the shop about your products. They get a lot of interesting cars in there

Ahh, not me no, but another forum member. @sdibbers is your man. Colin.

Edit: I've just realised, He has contacted you by PM. :oops:
 
Last edited:
I live closer still, It's a 10 min walk when I worked there. It wasn't worth getting the car out.
 
Back
Top